|
 |
"I got the plans thank
you. Good work indeed."
N. Tran -
Victoria, Australia.
From the
very detailed plans, you can build this quick lift jack. It is a fixed
height jack that will lift a quad, motorcycle, kart or lightweight race car
by a fixed amount. It does not provide incremental lift heights.
The real
benefits are that it is light, has a very low closed height, and, if
desired, the open height can be changed during
fabrication to a figure of
your choice by simply altering the lengths of the three links. The standard
height, when closed, is 65mm (2 ½”), and 305mm (12”) when open.
The
standard configuration has a large, square, diamond-plate lifting-platform,
but any dedicated jacking-point fixtures or diff locators can quite easily
be attached to the frame.
Three
tough engineering-grade plastic rollers allow the jack necessary movement
during the lifting operation. The rollers can be used for manoeuvring but
should not be used for transporting heavy loads once lifted.
The end of
the handle is angled upward, providing an easy grip without being too
obtrusive.
The
materials used are common items available from most hardware stores
and steel yards.
Many
workshops, garages and home builders will probably already have the majority
of the requisite materials at hand. No trick parts need to be purchased.
More than just a
CAD drawing,
this comprehensive manual
consists of the following:
US Supplier Of Suitable Materials
Purchase
The Quick Jack Plans Now |
 |
